Volume 51, Iss. 6, 2016

Journal of Chemical Technology and Metallurgy

51, Iss. 6, 2016
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)

EDITOR-IN- CHIEF
Prof. Dr. Bogdana Koumanova
Tel: (+ 359 2) 81 63 302
University of Chemical Technology and Metallurgy
8 Kl. Ohridski, 1756 Sofia, Bulgaria
E-mail: journal@uctm.edu

 

 

Carbon dioxide capture by adsorption (Review)

Ivaylo Hinkov, Farida Darkrim Lamari, Patrick Langlois, Moussa Dicko, Chavdar Chilev, Ivan Pentchev

 

Inductive heating of a cylindrical fluidized bed

Vesselin Idakiev, Andreas Bück, Evangelos Tsotsas, Lothar Mörl

 

Experimental investigation of cross flow mixing in an unstructured packed bed

Ali Alkhalaf, Hermann Woche, Eckehard Specht

 

Droplet deformation and coalescence under uniform electric field

Mostafa Brik, Robert Ruscassie, Abdellah Saboni

 

Synthesis of some novel 2-substituted-[1,3]thiazolo[3,2-а]benzimidazol-3(2H)-ones as potent cytostatic agents

Anelia Ts. Mavrova, Diana Wesselinova, Kameliya Anichina

 

Synthesis of a new benzanthrone probe for pH determination based on PET and ICT

Polya M. Miladinova

 

Impact damage, hardness and tribology characterization of epoxy resin based composites reinforced with basalt fibers in combination with TiO₂, BaSO₄ and SiC

T. Narendiranath Babu, R.V. Mangalaraja, S. Saravanan, D. Rama Prabha

 

Antimicrobial activity of SiO₂/cellulose ethers/Ag hybrid materials against Saccharomyces cerevisiae 537

Tsvetelina Angelova, Nelly Georgieva, Rudolf Müller

 

Lactobacillus spp. from traditional bulgarian dairy products

Veronica Nemska, Nevena Lazarova, Nelly Georgieva, Svetla Danova

 

Addition of transition elements to the phosphate sealing of cerium oxide protective primer deposited on AA2024-T3 alloy

Christian Girginov, Ivalina Avramova, Stephan Kozhukharov

 

Deformational strip heating effect on the deformation stress of high-strength automotive steels at cold rolling

Sergey S. Borisov, Anatoly K. Pogodaev, Igor P. Mazur

 

The influence of roll springing on the process of forge-rolling of billets in calibers

Igor M. Volodin, Pavel I. Zolotukhin, Evgenija P. Karpaytis, Aleksandr I. Volodin

 

Mechanical and wear properties of copper-lead alloy prepared by powder metallurgy processing technique

Muthuchamy Ayyapan, Narendra Kumar Uttamchand, Raja Annamalai Arunjunai Rajan

 

Effect of clay and goethite mineral systems inoculated with pyrite on arsenite removal from aqueous solution

Davidson E. Egirani, Napoleon Wessey

 

Guide for Authors