Volume 52, Iss. 1, 2017

Journal of Chemical Technology and Metallurgy

52, Iss. 1, 2017
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)

EDITOR-IN- CHIEF
Prof. Dr. Bogdana Koumanova
Tel: (+ 359 2) 81 63 302
University of Chemical Technology and Metallurgy
8 Kl. Ohridski, 1756 Sofia, Bulgaria
E-mail: journal@uctm.edu

 

Investigations on the dyeing ability of some reactive triazine azo dyes containing tetramethylpiperidine fragment

Polya M. Miladinova, Varbina R. Lukanova

 

Photocatalytic performance of TiO₂, CeO₂, ZnO and TiO₂-CeO₂-ZnO in the course of Methyl Orange dye degradation

Katya Milenova, Katerina Zaharieva, Irina Stambolova, Vladimir Blaskov, Alexander Eliyas, Ljubomir Dimitrov

 

Adsorption of Acid Blue 29 dye using fluidized granular activated carbon

Sukhmani Kaur, Virender Kumar Rattan, Rajinder Jindal

 

Polycarbonate diols to produce elastic polyurethane foams - a method of immobilization of carbon dioxide into a polymer structure

Kiril Dimitrov, Dimitrina Todorova, Sanchi Nenkova, Michael Herzog

 

Studies on ultrasonic welding of polycarbonate and acrylonitrile butadiene styrene blends

Chinnadurai T., Arungalai Vendan S., Mohan Raj N., Prakash N.

 

Determination of botanical origin of honey by mid infrared spectroscopy (Mid-FTIR), colorimetry and chemometric analysis

Svetla Lekova, Diana Tsankova

 

Flow behaviour in a membrane cross-flow filtration cell: experimental observations and CFD modelling

Daniela Dzhonova-Atanasova, Iren Tsibranska, Serafim Vlaev

 

Sustainable voltage reutilization of a microbial fuel cell of a low organic load using pH buffer solution injection

Chong Li, Kosta Boshnakov, Liping Fan

 

Direct decomposition of nitric oxide on perovskite type catalysts

Daniela D. Stoyanova, Srdjan P. Petrovic, Petya Z. Georgieva, Ana Terlecki-Baricevic, Dimitar R. Mehandjiev

 

Fabrication of high volume fraction alumina/aluminum composites via reaction sintering route

Keyvan Piri, Mahdi Shafiee Afarani, Ghodratollah Roudini

 

Matematical model of the foaming process of porous slag glass

Irina S. Grushko

 

Development of dinas refractory mass based on local resources of Uzbekistan

Azizjon A. Eminov, Zulayho R. Kadyrova, Raisa I. Abdullaeva

 

Wear loss behaviour of reinforced hybrid composite basalt fiber with titanium oxide, barium sulphate and silicon carbide

T. Narendiranath Babu, D. Rama Prabha

 

Extraction and separation of copper, zinc and iron by means of bifunctional extractant Kelex 100

Svetlana Zhivkova

 

Binary mixture of Cyanex 921 and Cyanex 923 as extractant for praseodymium (III) and neodymium (III)

Nandita Panda, Sujata Mishra

 

Evaluation of the effectiveness of liquation refining of zinc melts from iron impurity

Vladimir A. Kechin, Evgeny S. Prusov

 

Mathematical and physical modeling of two-stage cooling of coils rolled

Alexander B. Sychkov, Sergey I. Platov, Igor P. Mazur, Maxim A. Sheksheev, Sergey O. Malashkin

 

A comparative analysis of different special injector burner designs by using CFD

Adnan Ghareeb Tuaamah Al-Hasnawi, Eckehard Specht

 

Management of plastic bags waste: an assessment of scenarios in Jordan

Motasem N. Saidan, Linah M. Ansour, Hakam Saidan

 

Guide for Authors