Volume 56, Iss.1, 2021

Submitted by admin1 on Thu, 12/24/2020 - 09:36

Journal of Chemical Technology and Metallurgy

56, Iss. 1, 2021
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)

EDITOR-IN- CHIEF
Prof. Dr. Bogdana Koumanova
Tel: (+ 359 2) 81 63 302
University of Chemical Technology and Metallurgy
8 Kl. Ohridski, 1756 Sofia, Bulgaria
E-mail: 
journal@uctm.edu


 

New 1,3-disubsituted benzimidazol-2-ones as a promising scaffold for the antitrihinellosis agents development

Anelia Mavrova, Kameliya Anichina, Oisaemi Izevbekhai, Dimitar Vutchev, Galya Popova-Daskalova, Denitsa Yancheva, Simeon Stoyanov

 

The structural study, hirshfeld surface analysis, and dft calculations of 1,4-diallyl-6-chloroquinoxaline-2,3(1h,4h)-dione

Ali El Janati, Ivaylo Tankov, Rumyana Yankova, Youssef Kandri Rodi, Younes Ouzidan, Jerry P. Jasinski, Manpreet Kaur

 

Comparative study of Polyamide/Poly(phenylene ether) blend during modelled processings by Thermogravimetric analysis - Gas Chromatography with Mass Selective Detector

Margarita Natova, Christo Novakov

 

Conventional ultrasound and microwave-assisted extraction of phenolic compounds from mavrud grape, pomace and seeds

Ralitsa Chimshirova, Maria Karsheva, Svetlomir Diankov, Ivaylo Hinkov

 

Dielectric properties of new composites based on Graphene Oxide and nano-sized ZnO

Anna Staneva, Boris Martinov, Stanislav Slavov, Daniela Karashanova Janna Mateeva, B.M.G. Melo, Luis C. Costa

 

Structure and luminescent properties of Eu3+ doped glass in the system WO3-La2O3-B2O3-Nb2O5

Lyubomir Aleksandrov, Margarita Milanova, Reni Iordanova, Reni Tomova, Petia Petrova, Nikolay Nedyalkov

 

Research of the influence of the crystalline phase content on the structure and properties of porous glass-crystalline materials

Yaroslava Koltsova, Sergey Nikitin

 

The coloration of boron-free titanium enamels by salts of cobalt

Natalia Minakova, Tetiana Nahorna, Tetiana Kravchenko, Olga Fursa, Marta Kuznetsova.

 

Computational analysis for physico-chemical properties of Jatropha Curcus as feedstock for biodiesel production

Vipan K Sohpal

 

Enhanced decolorization of methylene blue in aqueous solution over composite photosensitized TiO2 catalyst by visible light

Vladimir F. Georgiev

 

Synthesis and testing of catalysts based on the cenospheres of fly ash of thermal power plant for processing of hydrocarbon raw materials

Raikhan Ibrasheva, Valentina Yemelyanova, Larissa Sassykova, Binara Dossumova, Tatyana Shakiyeva, Edgar Shakiyev, Bedelzhan

 

Impact of К2СО3 and triethylendiamine on the texturе parameters of new gas mask carbons

Liliya Manoilova

 

Preparation of coal briquettes based on non-standard kazakhstan coal with various additives and determination of their quality

Marat Tulepov, Larissa Sassykova, Almagul Kerimkulova, Gulmira Tureshova, Anar Zhapekova, Zukhra Sultanova, Sabit Tursynbek, Sholpan Gabdrashova, Dauren Baiseitov.

 

Adsorption mechanism for mitigation of toxic Zn2+ from synthetic polluted water onto blended composite of Chitosan/Kaolinite

Mahmoud F. Mubarak, Nabila Shehata, Hanan A. Ahmed

 

Performance evaluation of microbial fuel cell with air cathode

Blagovesta Midyurova

 

Decomposition of aluminate solution for aluminum hydroxide precipitation by carbonation: A thermodynamic and experimental studies

Valeh Aghazadeh, Somayeh Shayanfar

 

Obtaining of BaTiO3 powder as dielectric material for capacitor’s elements

Irena Markovska, Dimitar Georgiev, Fila Yovkova

 

Influence of low-temperature thermal radiation at the heat transfer to an air ambient

Rayko Stanev, Daniela Choshnova, Sevgin Velibashev

 

Optimization of the inhibition effect of sodium phosphate on the corrosion of ordinary steel in sea water by experimental design

Yassine Elkhotfi, Hanan Boubekraoui, Jallal Zoubir, Issam Forsal, Elmostapha Rakib

 

Corrosion evaluation of austempered aluminium-alloyed ductile irons in well water and 0.5M NaCl solution

Abdullahi Olawale Adebayo, Kenneth Kanayo Alaneme, Akinlabi Oyetunji

 

Anticorrosive activity of euphorbia officunarum extract for carbon steel in 1 M HCl

Abdellah Ezzanad, Rachid Benkaddour, Siham Echihi, Hicham Harhar, Mohamed Tabyaoui, Abdelkader Zarrouk

 

Comparative study of the influence of some nanomodifiers on the microstructure and corrosion properties of AlSi18 alloy

Vanya Dyakova, Yoanna Kostova, Valentin Manolov, Pavel Kuzmanov, Ivan Panov, Angel Velikov, Boyan Dochev

 

Mathematical model for evaluating the actual form of the profile’s contour of the hot-rolled strip’s cross section

Sergey M. Belskiy, Vladimir A. Pimenov, Alexander N. Shkarin

 

Laser powder bed fusion of austenitic stainless steels

Andrea Di Schino, Paolo Fogarait, Domenico Corapi, Orlando Di Pietro, Chiara Zitelli.

 

Study of the effect of binder types on the reduction process and metallurgical properties of indonesian titanomagnetite iron sand in the point of view of tunnel kiln process

Sungging Pintowantoro, Fakhreza Abdul, Fiqri Sanubari

 

Mechanical properties and phase evolutions in heat-treated cast Al-SiC-TiO2 metal matrix composites

Afolabi Ayodeji Ebenezer, Fatai Olufemi Aramide, Adeolu Adesoji Adediran, Abimbola Patricia Popoola

 

On leaching of rare earth elements from a davidite ore of the III region of chile

José Hernández, Jaime Tapia, Munir Dides, Francisco Cubillos

 

Guide for Authors