Volume 60, Iss. 3, 2025

Submitted by admin1 on Thu, 05/01/2025 - 09:45

Journal of Chemical Technology and Metallurgy

60, Iss. 3, 2025
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)

Editor-in-Chief
Prof. Dr. Dancho Danalev
University of Chemical Technology and Metallurgy

Co-Editor
Assoc. Prof. Dr. Angelina Popova
University of Chemical Technology and Metallurgy

 

 

Optimization of enzymatic hydrolysis of cassava (Manihot esculenta) starch containing cyanides

Hargono Hargono, Andri Cahyo Kumoro, Bakti Jos, Aji Prasetyaningrum, Dani Puji Utomo

 

Effect of time in the emulsification step on the yield and quality of urea-formaldehyde rose oil microcapsules obtained by interfacial in situ polymerization method

Stanislav G. Bayryamov

 

Study of the solubility and rheological properties of the Ca(ClO3)2∙2CO(NH2)2-C4H6O5∙NH2C2H4OH-H­O system

Okhunjon Rakhmonov Olim o‘gʻli, Akhat Togasharov Salimovich

 

A comparative study for choosing the best kinetic model using different error metrics

Ajay Kumar Agarwal

 

Resistance to corrosion of bimetal reinforcing rods received by explosion welding

Sylwester Sawicki

 

Synthesis of CoFeCrMnNi/TiC-high entropy alloy composite coatings by electrodeposition technique

Shanmugavel Sudarsan, Mariappan Anandkumar, Marina Samodurova, Sergey Lezhnev, Evgeniy Panin

 

Adsorption-desorption of gold onto activated carbon from cyanide-glycine leach solution of complex gold ore

Fatemeh Faghirinejad, Kianoush Barani, Reza Ghaedrahmati

 

Influence of modifier amount on the sorption properties of cellulosic material

Iryna Trembus, Anna Hondovska

 

Preparation and study of red-colored copper-containing ceramic glaze fired in an oxidizing environment

Janna Mateeva

 

Mineral and secondary clay raw material resources for obtaining high-aluminum masses

Afzal A. Eminov, Zulayho R. Kadyrova, Orazimbet О. Janabaev. Ashraf M. Eminov

 

Characterization of cement kiln dust from Bulgarian cement plants

Aleksandar Nikolov, Vladislav Kostov-Kytin, Mihail Tarassov, Liliya Tsvetanova, Nicolai B. Jordanov, Emilia Karamanova, Ivan Rostovsky

 

Production of portland cement clinker in raw mixtures based on mining and metallurgical production wastes

Khikmatula L. Usmanov, Zulayho R. Kadyrova, Shokhista M. Niyazova, Fakhriddin G. Khomidov, Jumabay B. Najimov

 

Dephenolization of coal tar heavy fractions: A reagent - free method for phenol recovery

Leonid Bannikov, Denis Miroshnichenko, Artem Bannikov, Olexandr Borisenko, Volodymyr Tertychnyi

 

Impact of Mg on diverse properties of eutectic Al - Si automotive alloy

Mohammad Salim Kaiser

 

Technological possibilities for the utilization of iron-containing waste from metallurgical industries

Iliyan Mitov, Boyan Yordanov, Rositsa Gavrilova, Veronika Karadjova

 

Design of electrohydroimpulse sheet metal forming using LS-DYNA

Xenia Arsentyeva, Ivan Kalatozishvili, Viacheslav Mamutov

 

Trace analysis of brilliant green dye by flow injection technique

Rahmah Hashim Abdullah, Amal Saadoon Majeed, Ahmed Saleh Farhood, Dakhil Nassir Taha, Nahlah Salman Saddam

 

Influence of aging process on UV inkjet black printed PVC foil

Bojana Milinković, Mladen Stančić, Igor Majnarić, Barbara Blaznik, Raša Urbas

 

Guide for Authors

 

The present issue of Journal of Chemical Technology and Metallurgy is published with the financial support of the Bulgarian Fund “Scientific Research”, Contract No KP-06-NP6/22, 02 December 2024.