Volume 51, Iss. 3, 2016

Submitted by admin1 on Sat, 09/29/2018 - 22:20
Journal of Chemical Technology and Metallurgy
51, Iss. 3, 2016
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)
EDITOR-IN- CHIEF
Prof. Dr. Bogdana Koumanova
Tel: (+ 359 2) 81 63 302
University of Chemical Technology and Metallurgy
8 Kl. Ohridski, 1756 Sofia, Bulgaria
E-mail: journal@uctm.edu
 
 
On the synthesis and application of some mono- and dis-azo acid dyes
Polya M. Miladinova, Reny K. Vaseva, Varbina R.Lukanova
 
Effect of bleaching procedure type on the aging resistance of chemical-mechanical pulp
Rumyana Boeva, Greta Radeva
 
Investigation of different enzyme activities from Pergularia tomentosa L. and Ecballium elaterium L.
Lahmar Imen, Lubov Yotova
 
In vitro free-radical scavenging activity of Aegopodium podagraria L. and Orlaya grandiflora (L.) Hoffm. (Apiaceae)
Miglena Valyova, Alexander Tashev, Stanimir Stoyanov, Stanislava Yordanova, Yordanka Ganeva
 
Organic modification of Bulgarian bentonite by an easy low cost method
Albena Yoleva, Stoyan Djambazov, Georgi Michailov
 
Regeneration of alkanolamines used in natural gas purification
Ruslan Khayitov, Gulnara Narmetova
 
Investigation of the mutual interactions of the components of a system substantiating the process of obtaining a new defoliant
Dilmurod Ergashev, Mamura Askarova, Saidahral Tukhtaev
 
Potential possibilities of a new method for yield stress determination
Georgi Peev, Dimitar Peshev, Agnessa Nikolova
 
Optimization of the inhibition efficiency of mango extract as corrosion inhibitor of mild steel in 1.0M H2SO4 using response surface methodology
Onukwuli O. Dominic, Omotioma Monday
 
The effect of preliminary and final heat treatment in course of the combined “rolling-pressing” process realization on microstructure evolution of copper
Sergey Lezhnev, Abdrakhman Naizabekov, Evgeniy Panin, Irina Volokitina, Toncho Koinov
 
On monitoring of mechanical characteristics of hot rolled S355J2 steel
Donka Angelova, Rozina Yordanova, Alexander Georgiev, Svetla Yankova
 
Slow cooling of medium carbon molybdenum steel bars to eliminate hydrogen induced cracks
Ravichandar Dhakshanamoorthy, Nagashanmugam Krishnan Bommannan, Balusamy Thangavel
 
Thermodynamic analysis of the sulphatization processes taking place in a dust-gas flow from flash smelting furnace
Peter Iliev, Vladislava Stefanova, Dimiter Shentov, Biserka Lucheva
 
A NURBS approximation of experimental stress-strain curves
Timofey V. Fedorov, Pavel G. Morrev
 
Dynamics of surface water pollution caused by open pit mining in copper concentrate production
Grigor Hlebarov, Nikolay Kozarev
 
Guide for Authors